AO Smith BN35 1.5Hp 48Fr Motor

A BN35 is a 48 Frame, 1.5 Horsepower. 115/230Volt 1 speed, thru-bolt pump motor with stand from AO Smith. Spa manufactures often put "marketing horsepowers" on their motors, we suggest you look at the amperage of the motor you are replacing and purchase one that is rated equal or higher. A BN35 motor is rated for 16amps and 115volts or 8amps at 230volts. Putting a smaller amperage on your current wet end can cause for premature motor failure that is not covered by the warranty. When replacing a pump motor like a BN-35 we strongly recommend you replace the shaft seal at the same time. A previously used shaft seal may not seal correctly allowing for leakage into the motor.

If you have questions reading the information from your pump motor please see our motor label page, or watch our quick video. As always we are here to help if you have a question email or call us.

This BN-35 Pump Motor Specs:

• 1.5 Horsepower
• 48 Frame
• Thru Bolt
• 115/ 230 Volts
• 16.0 / 8.0 Amps.
• 3450 RPM
  

This motor comes pre-wired for 230volts if you are hooking it up 115volts please follow the label or give us a call of wiring directions.

Spa Parts Online only sells new and motors. We can not stress enough the unreliability of reconditioned or rebuilt spa motors; we can however rebuild your motor. Read our blog on reconditioned motors.

Manufacturer: AO-Smith
Manufacturer Number: BN-35SS
Manufacturer Warranty: 1 year part